|
|
|
 |
ATM4-AMC Controller for ATM to IP Interworking
The ATM4-AMC card is a high performance AdvancedTCA Mezzanine Controller
designed for use in all aspects of telecommunications networks. The
ATM4 includes support for ATM host termination, switching and L2/L3/L4
or higher interworking between Gigabit Ethernet interfaces and ATM
interfaces. With support for AAL2 and AAL5, the ATM4 has the ability
for real-time voice and video over AAL2, as well as signaling and IP
over AAL5 in 3G/4G networks. The ATM4 is ideal for demanding carrier
applications in Wireless 3G, 4G, LTE, IMS, Internet Access, Fixed/Mobile
Convergence and Next Generation Mobile Networks such as:
- 4G, LTE-SAE
- WiMAX
- ASN Gateways
- 3G RNC, MSC, SGSN, and NodeB
- Voice over Packet
- Video Streaming
- Broadband Networks (incl GPON)
- ATM to IP Gateways
- Femtocell Access Controller
ATM4 Features
-
Multi-Purpose I/O board for 3GPP/IMS/LTE/NGMN Wireless Networks
- AMC form factor for ATCA & uTCA Platforms
- On-board interworking in 3 different modes:
- IP Over AAL5 to IP
over Ethernet
- AALx to UDP/IP over Ethernet
- GTP Interworking
- 32,560 bi-directional IW channels
- ATM AAL2 & AAL5 on a single
trunk
- 256 Virtual Circuits (VCs) for AAL5 termination
- Four OC-3c/STM-1 or Two OC-12/STM-4
- Up to Eight OC-3c/STM-1 paths
over Two OC-12/STM-4 lines
- APS for 1+1, 1:1, 1:3 or 1:7 ports between
two ATM4 cards
- External or Internal clock synchronization
- IPMI subsystem provides
ATCA/AMC.0 hot swap and board management services
- Transparent field
upgrades, without host rebooting, saving downtime
- Multiple cards
per system providing highly flexible and completely scalable solutions
- State of the art Wintegra WinPath2 Network Processor
- Four Gigabits Ethernet & One PCIe Lane to Carrier
- SFP Optical
Transceivers for Multi-Mode, Single Mode and OC12
- SAAL software;
SSCOP, SSCF/SSCS and SSSAR/SSTED/ SSADT
- Comprehensive alarms and
status reporting capabilities
- Software drivers for Linux and Solaris
as standard. Other OS support on request
ATM Termination
- AAL5
- ATM cell switching*
- AAL2 CID switching*
- Traffic management as per TM 4.1: CBR, VBR,
GFR and UBR+
- Per VC queuing
- Dual leaky bucket policing*
- Full UNI/NNI VPI/VCI range
- OAM F4 and F5 as per ITU-TI.610
GTP (GPRS Tunnelling Protocol):
-
Interworking between IP and GTP-U
- nterworking between two separate
GTP tunnels
- Handling GTP-C and GTP’ traffic
- GTP Bypass Ports
- 256 separate bi-directional GTP tunnels
- Up to 32750 GTP PDP contexts
IP
-
IPv4 and IPv6*
- PPP support*
- Parsing of PPP over HDLC frames (RFC 2615 and RFC
1662)*
- Packet Scheduling*
- Diffserv (RFC 2474/2475)*
* Future Release
|
 |
|
|
 |
|
|
|
Quick links |
|
|
ATM4 brochure
(PDF 664kb) |
|
|
|
|
|
 |
|
|
|
|
|
Intelligent Backhaul
or Flexible ATM-IP Interworking
The Adax ATM4 is ideal for solving today’s ATM-IP
interworking challenges. The ATM4 processes 1M voice packets
per second while handling the associated NBAB, ALCAP, Iub,
Iu-CS, or Iu-PS signaling, channel set-up, and call mapping.
Anywhere your network needs to bridge the gap is where the
ATM4 belongs.
Read more... |
|
|
|
|
|
 |
|
|
|
|
|
Contact info |
|
|
Adax Inc
Tel: (510) 548 7047
Email: sales@adax.com
|
|
|
Adax Europe Ltd
Tel: +44 (0) 118 952 2800
Email: sales@adax.co.uk
|
|
|
|
|
|
|